LYFOOCRANE PORTABLE CABLE-PULLING EQUIPMENT
500 kg Portable 220 V Cable-Pulling Winch
A compact single-phase winch with a U-groove traction drum, separate control box and foot switch for cable installation and retrieval work.
Engineered for the Application
A compact single-phase winch with a U-groove traction drum, separate control box and foot switch for cable installation and retrieval work. Final drum geometry, drive, controls and protection are configured around the actual cable, rope or hose system.
Develops traction while supporting the cable jacket.
Compact drive arrangement.
Flexible placement for operator visibility.
Momentary hands-free command input.
Reference Specifications
| Rated Tension | Motor | Supply | Rope Diameter | Drum Speed | Average Speed | Weight | Dimensions |
|---|---|---|---|---|---|---|---|
| 500 kg | 0.75 kW | 220 V, 1 phase, 50 Hz | 6 mm | 17.75 rpm | 5 m/min | 50 kg | 270 × 462 × 639 mm |
Typical Applications
Cable installation · underground works · port maintenance · plant construction · logistics equipment
Engineering Note
The 100–5,000 kg statement describes a customizable range, while the listed case is 500 kg. “Portable” should be evaluated against the 50 kg machine weight. A foot switch does not replace guarding, an emergency stop or a defined cable-guiding procedure.
Final selection must also define duty cycle, ambient conditions, guarding, emergency stopping, anchorage and applicable local standards. Not intended for personnel lifting unless separately engineered and certified.
Request a LYFOOCRANE Project Configuration
Send the line type and diameter, working length, required pull, speed, duty cycle, power supply, control interface, environment and installation drawing.